-
The Gen IV is Vintage Air’s most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.
Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
Infinite just-right-temperature air blending
Infinite blower fan speed adjustment
High-volume dehumidified defrost mode
Separate high-capacity aluminum plate & fin cooling coil
Copper/brass CuproBraze™ parallel-flow heater coil
Mounts behind the dash
Uses your factory system controls with our patented Electronic Cable Converters
Flat steel firewall cover panel
Replacement molded glove box (reduced capacity)
This kit fits 1967-72 Chevrolet and GMC Pickups without factory air, but with factory air controls. WARNING: California proposition 65NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. SureFit™ systems may interfere with some OEM radios or in-dash speakers. -
This Gen IV SureFit™ control panel kit is designed to bolt into the OEM dash location and work directly with the Gen IV SureFit™ evaporator system for your vehicle.
The kit includes a replacement control panel designed to bolt directly into your OEM dash, along with a wiring harness and detailed installation instructions.
-
This Gen IV SureFit™ control panel kit is designed to bolt into the OEM dash location and work directly with the Gen IV SureFit™ evaporator system for your vehicle.
The kit includes a replacement control panel designed to bolt directly into your OEM dash, along with a wiring harness and detailed installation instructions.
-
This standard hose kit is designed specifically for use with a complete Gen IV SureFit™ system and the stock engine compartment configuration and core support for your vehicle. The kit contains refrigerant hoses with pre-crimped beadlock fittings, along with O-rings and any necessary mounting hardware. Be sure to look at the instructions included with your evaporator kit for hose routing and installation details.
-
This SureFit™ condenser kit has been custom designed by our engineering team to mount directly into your vehicle. In addition to the parallel-flow condenser the kit includes a receiver/drier a binary safety switch and all of the necessary hardlines and hardware for mounting into a stock configured engine compartment and core support. Detailed installation instructions are also included.
-
The Gen IV is Vintage Air’s most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.
Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
Infinite just-right-temperature air blending
Infinite blower fan speed adjustment
High-volume dehumidified defrost mode
Separate high-capacity aluminum plate & fin cooling coil
Copper/brass CuproBraze™ parallel-flow heater coil
Mounts behind the dash
Uses your factory system controls with our patented Electronic Cable Converters
Flat steel firewall cover panel
Replacement molded glove box (reduced capacity)
This kit fits 1967-72 Chevrolet and GMC Pickups with factory air. WARNING: California proposition 65NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. SureFit™ systems may interfere with some OEM radios or in-dash speakers -
The Gen IV is Vintage Air’s most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.
Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
Infinite just-right-temperature air blending
Infinite blower fan speed adjustment
High-volume dehumidified defrost mode
Separate high-capacity aluminum plate & fin cooling coil
Copper/brass CuproBraze™ parallel-flow heater coil
Mounts behind the dash
Uses your factory system controls with our patented Electronic Cable Converters
Flat steel firewall cover panel
Replacement molded glove box (reduced capacity)
This kit fits 1967-72 Chevrolet and GMC Pickups without factory air. WARNING: California proposition 65NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. SureFit™ systems may interfere with some OEM radios or in-dash speakers. -
The Gen IV is Vintage Air’s most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Evaporator kit includes the evaporator unit and mounting brackets louvers (where required) duct hose wiring harness our patented Electronic Cable Converters hardware and installation instructions.
Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
Infinite just-right-temperature air blending
Infinite blower fan speed adjustment
High-volume dehumidified defrost mode
Separate high-capacity aluminum plate & fin cooling coil
Copper/brass CuproBraze™ parallel-flow heater coil
Mounts behind the dash
Uses your factory system controls with our patented Electronic Cable Converters
Flat steel firewall cover panel
Replacement molded glove box (reduced capacity)
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. SureFit™ systems may interfere with some OEM radios or in-dash speakers. -
64-72 Chevy & GMC Pickup & Suburban; 69-72 Blazer & Jimmy
Cloth
Cloth Defroster Hose Set. -
0849-332 This chrome A/C center dash vent
1967-1972 Chevrolet Pickup Truck
1967-1972 GMC Pickup Truck1969-1972 Chevrolet Blazer
1969-1972 GMC Jimmy
1967-1972 Chevrolet Suburban
Measurement 6x2x2
Weight 1lb -
0849-333 This center A/C vent adapter fits:
1967-1972 Chevrolet Pickup Truck, Blazer and Suburban
1967-1972 GMC Pickup Truck, Jimmy and SuburbanMeasurement 11x3x2.5
Weight 1lb